Archive | Weathered Metal Tutorial RSS feed for this section

Weathered Metal Effect Tutorial

15 May
Photo by CB Lindsey

Photo by CB Lindsey

During the amazing eight hours that we were in costume at C2E2, we received a large number of compliments about our work weathering and distressing our helmets. This was a very time-consuming process on larger pieces but it’s fairly simple to execute.

Materials Needed

  • Black Acrylic Paint
  • Paint Brush
  • Paper Towels or a Rag
  • Q-Tips

Painted Weight

First off, if you’re going to be adding this weathering technique to a piece that you’ve already painted, make sure that your paint has completely dried. We’re going to be applying black paint and then rubbing it off and you wouldn’t want your first coat of paint to smear.

In this instance, we’re working with craft foam that’s been shellacked and painted with spray paint. We’ve allowed it to dry completely before we started working on the weathering.

Next, using your paint brush, slather on the black acrylic paint. You can put it on thick because you’ll just be wiping it all away in a few moments. You don’t want to cover too much of the surface in the paint at the same time or you run the risk of it drying before you have a chance to attack it with the paper towel or rag. Take it in sections. It’s alright if some spots are uneven; in real life things don’t usually get the same amount of dirty in all places, right?

Weathering the Weight

Wipe Paint off WeightAs you can see in the picture above, we’re just wiping the paint away with an old dish rag that we decided to sacrifice to the Cosplay gods. Remember, the goal here is not to completely wipe away the paint. The goal is to leave just enough to make the piece look dirty; as if someone had tried to clean it once but done a terrible job.

If you rub off too much of the paint, go back and reapply. Keep at it until you’re happy with the amount of grunge.

You can also use a Q-Tip to really get into the nooks and crannies. In the example below, Daniel used a Q-Tip to heavily apply the paint in the small holes of the weight.

Weathered WeightIn the case of Subject Delta’s helmet, we used a thinner brush to get in between all of the cap nuts and Q-Tips to get in between the panels on the top of Eleanor’s helmet. It’s pretty easy, albeit time-consuming but the results are worth it as you can see below.

Subject Delta's Helmet Painted Subject Delta's Helmet Distressed

We learned how to do this by watching a tutorial put up by Valentine Cosplay, a fantastic cosplayer we’ve been following since we had the pleasure of stumbling across his blog. He has a You Tube channel filled with little gems if you’d like to check him out.

Weathered Metal Effect Tutorial

Hope you found this helpful!! — TCG