Tag Archives: Eleanor Lamb Harpoon

Level 4:4 – Stabilize Ranged Weapon

13 Jun

Eleanor Lamb's Harpoon

When last we spoke about Eleanor Lamb‘s harpoon, we’d finished the initial construction and were gearing up to paint.

For the harpoon we used gold for the base, silver for the harpoon itself and the side tubes and then brass for the body and scope of the piece. We hit it with several layers of Shellac first and then, once that was good and dry, we used Rust-Oleum brand spray paint to add some color. Daniel worked in phases for this. First he did the copper, then the gold for the base and then the silver. Due to all the tape we had to use between each application, there was quite a bit of touch up to do. For the touch ups, we hand painted with some acrylic paint. It wasn’t a perfect match but, knowing that we planned to distress it, I beat my rampaging perfectionism into submission. If you’re interested in reading more about our spray-painting in mid-winter saga, you can do so here.

Eleanor Lamb's Harpoon Top View

After having spent such a long time looking at our cosplay in multiple colors of foam and plain ol’ PVC pipe, it was magical to see it in it’s intended color.

We used some more of the hand-detailed straps mentioned in our posts about Subject Delta’s suit to secure it to my arm. We decided to use functional buckles and straps for authenticity, not taking into account how difficult this might be to change in and out of. More on that at a later date. We selected some copper-colored screws so that we could keep up the metallic motif.

The first time that I tried on the finished harpoon, with the bolts from the strap screws poking my arm, I realized that I might need some sort of cushioning between my arm and the stabby bits of the prop. So I whipped up some foam arm guards out of 5mm craft foam.

Arm Preparing to PaintSadly, I didn’t take any pictures of foam before it cut it and this was a hasty bit of foam crafting to say the least. I simply measured my forearm at the thickest part for width and my forearm from the wrist to the elbow for the length. Then, using those measurements, I cut a square out of 5 mm craft foam. Since I was working with a simple square, there was unsightly, uneven overlap as I wrapped it around my forearm. I could have that, so I whipped up a piece of 2 mm foam that would look like a bolted on plate to cover the seam. Here it is before painting. You can see that I’ve rounded the edges as well as cut out little “bolts” from 5 mm foam for some visual interest. Also pictured is the acrylic paint I used to paint the piece.

Once I had it all painted and hot glued together I added two long strips of Velcro, one to the edge of the large 5 mm craft foam square and the other to the 2 mm thick plate. I secured the Velcro with hot glue. We’ve pulled up the edges here so you can see how we’ve got this set up.

Arm seam

In the picture above, you can see the faint outline of the base of the harpoon pushed into the foam. The snug fit of the harpoon base kept it steady while on my arm. However, after several days of taking the arm guards off and on, the hot glue holding the Velcro started to go so I reapplied the hot glue and then tacked the corners and middles of the Velcro into place with a needle and thread. Who says you can only stitch cloth?!

The final step in crafting Eleanor Lamb’s harpoon was the weathering. We used black acrylic paint and the process outlined in our Weathered Metal Tutorial on both the harpoon itself and the arm guards. We didn’t get a great picture of the harpoon before and after weathering but we do have a great one of the arm guards for you to check out. The arm guard on the left hasn’t been weathered yet while the arm guard on the right has been weathered.

Weathered Arm Guard Top Weathered Arm Guards Bottom

And here’s our finished product!

Eleanor Lamb Cosplay Harpoon Pic

Thanks for checking out our posts on Eleanor Lamb’s harpoon even though we didn’t have a lot of pictures this time around. Can’t tell you how excited we are to finish up some of the pieces of our Cosplay, we hope you’ll check out some of the other posts as well! — TCG

Advertisements

Level 4-3: Assemble Ranged Weapon

18 Feb

Hola fellow Cosplayers! Daniel here! With only two short months or a little over 8 measly weeks from C2E2, the stress has definitely kicked up ten fold with the announcement of The Crown Championships of Cosplay!

What-the-what!? A major cosplay contest at the event where we plan to unveil our first serious cosplay venture!? With Yaya Han as a judge!? Yaya Han!?!?!?

 Bring it on!!!

With Eleanor Lamb’s syringe built, it was time to take a crack at her secondary weapon – the harpoon. There are actually very few reference photos for the design and look of the harpoon and game play references weren’t much help either. So we had to piece together our best interpretation of it based on the couple of sources we had and other peoples’ takes. You can see a little bit of the harpoon on the left hand in the reference picture.

Eleanor Lamb screen shot

Eleanor Lamb's Harpoon MatterialsWe again started by cutting a large PVC tube in half to serve as the base for the harpoon mechanism. Sara sanded down and rounded the edges to make for a more comfortable fit. We then attached a 1 ½ ft. long section of 1” PCV pipe to the top of the base to serve as the ‘gun barrel’ for the harpoon itself.

Body of Eleanor Lamb's Harpoon

We fixed a decorative PCV cap on the front of the barrel and decorative PVC connector (that looks like a loading port) to the back-end of the barrel. We then drilled a hole in the front cap to feed the harpoon through.

All in all, the harpoon was starting to shape up nicely, but I wasn’t convinced that we had it looking like it was ‘functional’ as the syringe. What we needed was a ‘compression-chamber-looking-device’ that would give the appearance that the harpoon had propellant capabilities.

Sara dashed my first idea to pieces, which was to have the harpoon barrel feed into a shorter, squatter section of PVC tubing positioned at the back of the barrel to look like a  mini-propane tank. Her concern was that it would look too bulky and would be a hassle to tote around all day. She was quite right.

Eleanor Lamb's Harpoon TriggerI decided that the best solution was not one large chamber positioned at the back, but two, smaller chambers arranged on either side.  I took some of our extra 1/2” wooden dowel rod  and cut two identical ‘tubes’ with a 45 degree angle cut at one end.  I then fixed a tube to each side of the barrel and viola! But how does this thing ‘fire?’ We decided to construct a button mechanism to rear portion of the barrel.

We started by gluing one of our smaller Plastic Insulated Bushings to the top of the barrel. However, the circumference of the bushing was slightly wider than the PVC barrel and hung out to the sides. To correct this I constructed a foam housing to straddle the barrel and wrap around the excess bushing.

Button for Harpoon TriggerWe then used the top cap from an old floor lamp as the actual button itself. It resulted in a rather impressive looking button element!

For an added bit of flair we also added a ‘sight’ to the front end of the barrel to even out the design. Luckily our package of flex tubing came with a nifty little plastic connector that did just the trick!

Eleanor Lamb's Harpoon Body

Lastly was the harpoon itself! I started by cutting a 2 ½ ft. section of  ¼” dowel rod. I then sanded down the tip to a rounded point.  Now the hard part – the harpoon blades or barbs as they are sometimes called. Which… in hindsight weren’t so hard after all. See what I did with that ellipses there? I’m so tricky! I started by cutting three ¼” slender parallelograms from 2mm foam. I then notched out three slots in the harpoons shaft using our X-acto knife and hot glued them into place.

Foam Blade Shape

And there you have it – a pretty darn good harpoon if I do say so myself!

After a bit of painting well fix it up with some leather arm straps and we’ll be set!

Eleanor Lamb's Harpoon

Here’s an action shot complete with Eleanor Lamb’s helmet, syringe and harpoon to tide you over while we get back to work as there is still so little to do and so much time. Wait… strike that, reverse it. — TCG

Eleanor Lamb Helmet and Weapons